Amerec DSNR-45S
Designer S Series 4.5KW Sauna Heater, Amerec
The Amerec Designer-45S 4.5-kilowatt sauna heater is engineered to power sauna rooms with dimensions up to 210 adjusted cubic feet (ACF).
- 4/13/17: Replaced by the designer Trend heater
- 8/20/19: Designer S heater is not actively marketed, Finland is no longer manufacturing but has many left in stock so continues to ship to the US for distribution. However, once that supply is gone it will not be replaced
- Wall-mounted
- Stainless steel construction
- Industrial grade, serviceable heating elements
- Operates with SC Series Controls
- Exceptionally large rock capacity
- Direct rock-to-heating element contact
- UL listed
- For sauna rooms from 100 to 210 adj. cu. ft.
- 4.5KW Heater, 23”H x 16-1/2”W x 11”D
- 50 Lbs. of Olivine sauna stones
- Installation Manual
- Limited Warranty
| Model | DSNR-45S |
|---|---|
| Shipping Weight | 85 lbs |
| Minimum Adjusted Cubic Feet | 100 |
| Maximum Adjusted Cubic Feet | 210 |
| Kilowatt Rating | 4.5 KW |
| Width | 16-1/2" |
| Depth | 11" |
| Height | 23" |
The Amerec SC-60 is a wall-mounted, dial time and temperature control to monitor your bathing environment.
The Amerec SC-Club is a wall-mounted, ON/OFF switch intended for commercial applications where an attendant is present.
The Amerec SC-9 control panel is a wall-mounted, dial time and temperature control which monitors the bathing environment.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 311 Sauna Room Temperature Sensor Guard.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 321 Sauna Room Temperature Sensor Guard.
Sauna Heater Rocks, Bathology
The secret to successful sauna bathing has always been the rocks.
A cleaner specially formulated for wood saunas!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your home sauna.
A cleaner specially formulated for wood saunas!
This powerful disinfectant cleaner kills Mold, mildew and odor-causing fungi on contact.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.