Steamist SMC-120
Steamist SMC-120
SMC-120 SM On/Off Secondary Control Package, Steamist
SMC-120 SM On/Off Secondary Control Package, Steamist
Model
MS225E
Designed for use with the Steamist SM Series of steam generators, the Steamist SMC-120 steam shower control package is suitable for installation outside of the steam room.
Internal Notes
- 1/1/18:New Manufacturers Guide: SM to SMP Switch
- Per Mike Rempel 11/29/17 - There is no temp limit, it will just keep running and getting hotter until someone stops it or it times out. The timer is inside the steam generator, set for 30minutes as default. Older SM-11 and up models were set to 60min, this can be adjusted down to 30min.
- Simple start/stop switch
- Mode indicator light
- Pre-set time cycle
- Inside or outside the steam/shower enclosure installation
- Available in Polished Chrome, Brushed Nickel, Polished Nickel, Polished Brass, and Oil Rubbed Bronze designer finishes
- Low voltage operation
- Functions as an outside-shower control when installed with a SMC-150
- SMC-120 surface-mounted control, 3-7/10" x 3-7/10" 1-1/4" deep
- 6-pin, 6-wire control cable, 25' long with "snap-in" connectors
- 6-pin, control cable splitter
- RTV silicone sealant, .5 oz tube
- Control cable strain relief
- Installation and operation manual
- Limited warranty