AX Series 11KW Steam Shower Generator, Amerec
AX Series 11.2KW Steam Shower Generator, Amerec
Model
MS225E
The Amerec AX11 steam bath generator from the AX Series boasts a 11.2 kilowatt power rating and is made for home steam baths with dimensions between 175 to 375 adjusted cubic feet.
Internal Notes
- 12/15/16: Per Pat Smith - can be wired for 240V 3PH in the field, not factory. Only the AX can be wired this way.
- 4/27/17: Warm start included and only works with A6 control. If connecting generators to accommodate a larger room size, you need to purchase a tandem cable 5304-030 and use an additional steam head, autodrain, plumbing fittings, etc. just like we used to on systems like AK30. Warm start cable is sold separately 8855-139. Order in 240V or 208V and field wire for 1PH or 3PH
- Warm Start feature standard
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Exterior plug-in jacks allow quick and easy connection of control and sensor
- Low voltage safety control circuits
- Electrical can be wired for 1 or 3 phase in the field
- Available Auto Drain automatic draining system
- Optional tandem operation for room size greater than 550 cu ft (requires purchase of a tandem cable)
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- Steam bath generator
- Control Cable 50' 4-wire CAt5
- Sensor cable 50' 2-conductor
- Installation and operation manual
- Limited warranty
Swipe horizontally to reveal full table content.
| Model | AX11 |
|---|---|
| Minimum Adjusted Cubic Feet | 175 |
| Maximum Adjusted Cubic Feet | 375 |
| Shipping Weight | 32 lbs |
Swipe horizontally to reveal full table content.
| Electrical | 240V/1PH | 240V/3PH | 208V/1PH | 208V/3PH |
|---|---|---|---|---|
| Kilowatt Rating | 11.00 KW | 11.00 KW | 11.24 KW | 11.24 KW |
| AC Voltage | 240V AC | 240V AC | 208V AC | 208V AC |
| DC Voltage | 5V DC | 5V DC | 5V DC | 5V DC |
| Phase | 1PH | 3PH | 1PH | 3PH |
| Nominal Amperage | 46 Amps | 26 Amps | 2 Circuits, 18 and 36 Amps Respectively | 31 Amps |
| Recommended Protective Device | 60 Amp | 40 Amp | 2 Circuits, 30 and 50 Amps Respectively | 40 Amp |
Swipe horizontally to reveal full table content.
| Water Supply Connection | 3/8" NPT |
|---|---|
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 10 PSIG |
| Control "Rough-In" Cut-Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 16-1/2" |
| Depth | 6-1/4" |
| Height | 15" |